manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 302 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 302

D950/Vista7 Digital Mixing System

5-40 

  

Au

SW V3.3

Date printed: 27.08.03

branches of the Mix Tree. This is  depending  on the order in which Mix
Passes were added to the Mix Pass Stack. 

Using 

UNDO

 /

 REDO

:

• Discarding an Undesired Pass: If a new Mix Pass was just completed,

the new pass will be at the top of the stack and will become active. If it
contains unsuccessful moves, going back to the previous pass is as easy
as pressing 

UNDO

.

 When 

UNDO

 

is pressed, the previous Mix Pass will

become active and therefore the basis for the next new pass. In this re-
gard, consecutive presses of 

UNDO

 

will allow the user to “back up” to a

Mix Pass that provides a suitable point from which to restart.

• Real-time Mix Comparison: Pressing 

UNDO

 /

 REDO

 while a Mix Pass is

being replayed, adjacent passes in the Mix Pass Stack may be compared
in real-time.

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов