manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 270 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 270

D950/Vista7 Digital Mixing System

5-8 

  

Au

SW V3.3

Date printed: 27.08.03

5.1.3

 

Automation Keys on the Channel Strips

Vista:

Punch IN/OUT:

Four keys are representing the recording state of its member objects:

[5]

Fader

[6]

Mute

[7]

Knob

[8]

Switches

AUTO MODE

 [9]:

Toggles between different automation modes: READ, WRITE, TRIM,
ISOLATE. As a standard, only the objects selected in the “pre-selector
area” of the Au panel  (e.g. FADER) are toggled, but not the
whole channel.
This key has also the important function to suppress the detection of a
physical touch or un-touch of any objects. It is therefore possible to modify
a value without putting the object into “held” mode. Or – vice versa – it is
possible to physically un-touch an object so that the automation doesn’t
detect the un-touch (object is still considered as “held”). This is the reason
why this key is sometimes referred to as “modifier key”.

[7]

[8]

[5]

[6]

[9]

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов