manualshive.com logo in svg

Studer Vista, Руководство по эксплуатации, Страница: 154 / 713

Поделиться
Скачать
Studer Vista Скачать руководство пользователя страница 154

D950/Vista Digital Mixing System 

4-26  GC Operation

 

SW V3.3

Date printed: 05.08.03

4.4.2.4

 

Making and Clearing the Cross-Points

The creation and updating of cross-points is simple. First, select the Source
and Target; the Selection Bars have to be crossed to form an X-Y pair.

There are two ways of making or breaking a cross-point connection:

•

By double-clicking the left trackball button, while the cursor is positioned
over the crossed Selection Bars, or

•

By using the function keys

 

on the control surface keyboard;

Vista:

D950:

Using the 

MAKE CONN

 (make connection) function key will always make a

default connection, depending on the Source- and Target-type combin-
ation. Using the 

CLEAR CONN

 (clear connection) function key will always

clear any cross-point connection. (This is the 

fastest

 method to make or

clear a connection.)

Double-clicking the left track ball button: This method is more sophisti-
cated, because it allows you to select from a 

number 

of connection options

displayed in a pop-up menu box. The menu display depends upon the
combination of Source (mono or stereo) and Target (mono or stereo). The
uppermost connection type in the menu is the default connection type,
which is applied if you use the function keys, as shown above.

Mono Source – Mono Target:

Empty Box: No Connection

Mono-Mono Connection

Clear

Содержание Vista










































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов