Studer Vista 5 M3 Скачать руководство пользователя

Страница: 85 / 564

Vista 5 M3 Digital Mixing System

Desk Operation 2-45

2.11.2 Fader Bay View

By clicking into the

meter area

of one of the fader bay icons (

Faderbay 1...

the corresponding Vistonics view opens up. The upper part of the selected

fader bay icon is highlighted in order to make clear which bay the operator

is looking at.

The

LINK / SEL

button below the label area of the Vistonics screen is used

to assign a single central fader that is displayed on the right-hand side. As

long as the fader knob is ‘touched’ (i.e., the mouse pointer is located upon it

and the left mouse button is pressed), the current fader value is displayed in

both channel label fields, as shown in the screenshot above. If FaderGlow is

active, this is reflected on the single fader as well.

Channel Grouping (Ganging)

The

MULTI SEL

button allows grouping channels for parallel operation. If a

channel is selected with its

LINK / SEL

button, a click on

MULTI SEL

fol-

lowed by a click on the next desired

LINK / SEL

button builds a two-channel

group; a third channel is added to the group by another click on

MULTI SEL

and the next

LINK / SEL

button, and so on, until all the desired channels are

grouped. The other way round, a click on

LINK ALL

and any

LINK / SEL

button selects all currently displayed channels; then, using the

MULTI SEL

and

LINK / SEL

buttons allows removing channels from the group.

There is a different, convenient way for building a channel group (or gang):

Left-click-and-hold a

LINK / SEL

button, then – while still holding the left

mouse button – right-click on another one. This will add all

LINK / SEL

buttons between the selected ones to the group. This works, by the way, also

when right-clicking-and-holding first and left-clicking afterwards.

Document generated: 28.08.13

SW V4.9

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды