Studer Vista 5 M3 Скачать руководство пользователя

Страница: 393 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-97

Document generated: 28.08.13

SW V4.9

5.14.1.3

Loading Protection Sets

To make a Protection Set the current set, it must be Loaded unless it was the

last set used or saved.

Using the following procedure, previously created Protection Sets may be

loaded:

Click the ‘Mix Protection Enabled’ button to open the ‘Automation Pro-

tection’ window if it is not already open.

Click the ‘Load…’ button and a selection box containing the available

Protection Sets will be displayed. The current Protection Set will be

displayed at the bottom of the box in the ‘Current Protection Set:’ field.

The current set will also be shown in blue in the Protection Set list. All

others will be in black.

Double-click the desired Protection Set or click it and ‘Load’. The se-

lected set will become the current set and the selection box will close.

Note

Protection Sets cannot be loaded from other Titles. Protection Sets made

within a Title are only available to that Title. Protection Sets made within a

Title are available to all Mix Passes within that Title.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды