Studer Vista 5 M3 Скачать руководство пользователя

Страница: 373 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-77

Document generated: 28.08.13

SW V4.9

5.11 Switch Automation

Switch automation using AutoTouchPlus is both easy to use and flexible

enough to facilitate numerous functions and modes of operation.

Real-time Switch Editing

The location of switch state changes may be edited in real-time. Adding or

deleting switch events may also be easily accomplished.

In general, the following types of switch events may be created and edited:

• Mute On/Off: Turns the channel Mute on and off

• Process In/Out: Engages and disengages the configured processes

• Process Control Switches: Performs switch functions within configured

processes

Note:

Channel Mute operates within AutoTouchPlus as a switch, but since it has

its own Status key, some Mute functions are performed differently as other

switches. These differences in operation will be noted where needed.

Other system controls that are seen by AutoTouchPlus as ‘switches’ but have

alternative means of control. These controls are discussed in detail elsewhere

in this document, but warrant mention here:

• Selectors: Choosing the routing of audio or audio processor functions

(Channel Input Selector or Filter Slope for example). See below.

• General Patch Connections: Making or breaking General Patch Connec

tions. Refer to

chapter 5.12.1

, General Patch.

• Channel Patch Direct Out Tap: Changing the location from where the

channel Direct Output is derived. Refer to

chapter 5.12.2

, Channel Patch.

• Channel Patch Meter Tap: Changing the location from where the channel

Meter feed is derived. Refer to

chapter 5.12.2

, Channel Patch.

• Channel Patch Processor Order: Changing the location of processor blocks

within the channel. Refer to

chapter 5.12.2

, Channel Patch.

<Option>

• With <Read Safe> checked in the Misc Options page (refer to

chapter

5.22.7

), AUDITION mode is defeated for controls in READ and only Read

Mix values will be heard.

5.11.1 Switch Classifications

The multiple switches on the channel strip can be defined as being either

VMC oriented or control oriented. The classification of the switches (and

other controls) is determined by whether or not they are defined in VMC file.

If they are not defined by the VMC, they are control oriented by default.

• VMC-oriented controls:

By definition, the objects (controls in this case)

that appear in the VMC are audio oriented. These objects directly affect

the audio and/or its routing.

• Control-oriented controls: By definition, these controls have an operational

orientation and do not directly affect audio. These controls perform system

oriented functions.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды