Studer Vista 5 M3 Скачать руководство пользователя страница 342

Страница: 342 / 564

Vista 5 M3 Digital Mixing System

5-46 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Automation Menu

• Selecting

Clear TRIM Replay Data

from the

Automation

menu in the

GC deletes the fader Trim Replay Data and creates a new Mix Pass with

0 dB recorded as the new Trim Replay value.

Entering TRIM RECORD

Controls in

Trim Enable

can change to

Trim Record

using any of the fol-

lowing methods:

•

Local Touch (Touching the control on the Channel Strip) or CGM Touch.

TOUCH – Record

engaged or the

ISO (AUTO MODE)

modifier key must

be used.

•

Global punch-in via

GLOBAL RECORD – Punch In

button, or Auto-

Punch, or GPI (refer to

chapter 5.9.5

5.7.4

Isolate

is the system’s manual mode. Controls in

Isolate

neither respond

to or create new mix data. In other words, the control is essentially removed

from the automation system; it becomes strictly a manual control.

Note

A control in

Isolate

mode differs from a Static control in regard that changes

in an Isolated control’s position are not written to Mix Passes. Likewise, Static

values are not applied to Isolated controls.

Isolate

Rules

Record

Off:

•

Isolate

: The control acts like a manual control and is unaffected by any

previously written Read and Trim Replay data.

- The audio follows the control position

Record

On:

• A control in

Isolate

cannot be placed into record.

5.7.5

Control Mode Entry

Controls may be put into the various Control Modes using different methods:

•

Globally using the Global

CONTROL MODES

Activator buttons and

other controls in the ACU window.

•

Locally using the channel strip

ISO (AUTO MODE)

key.

•

When AutoTouchPlus is turned On using the

Mix On

button in the ACU

window (or the

Mix On

desk key). Activating the system will engage the

Control Mode selected in the Panel Presets Options page.

Note

Multiple Control Modes may be active on the console simultaneously.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Бренды по названию

Популярные бренды