Studer Vista 5 M3 Скачать руководство пользователя

Страница: 333 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-37

Document generated: 28.08.13

SW V4.9

• Creating a new Mix Pass: The newly created Mix Pass will be added to

the top of the Mix Pass Stack and becomes active.

• Right-clicking a Mix Pass in the Mix Tree: The Mix Tree Right Click menu

will open. Selecting ‘Set As Read Mix’ will cause the selected Mix Pass

to be added to the top of the Mix Pass Stack and become active.

Conditions

The Active Mix Pass cannot be changed while RECORD is engaged.

5.6.1.1

Mix Comparison

One of the unique features of AutoTouchPlus is the ability to compare Mix

Passes while the mix is running. Any Mix Pass in the Mix Pass Stack can be

accessed at any time, even while a mix is being played back.

Comparing Mix Passes

Mix Pass comparisons can be performed in one of two ways:

• Clicking a Mix Pass in the Mix Pass Stack: The clicked Mix Pass will

become active after a short processing delay. Using this method, passes

in the Mix Pass Stack can be activated in any order.

•

Undo/Redo

buttons: The

Undo/Redo

buttons activate adjacent Mix

Passes in the Mix Pass Stack (see below).

Conditions

Mix comparison is disabled once Record has been entered.

Note

A fair amount of processing must take place when switching between Mix

Passes. Due to the time it takes to perform this processing a slight delay is

normal.

5.6.1.2

Undo/Redo

Undo

and

Redo

buttons are located in the top row of the ACU Window. They

allow the user to essentially ‘undo’ and ‘redo’ changes as they are made within

the course of a mix. They also provide a method for real-time mix comparison.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды