Studer Vista 5 M3 Скачать руководство пользователя страница 255

Страница: 255 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-111

Document generated: 28.08.13

SW V4.9

This action will open the Edit relay labels page and first allow selection of

the desired relay, and then to enter a user label for each relay. Be sure to click

ok when finished; otherwise all changes will be lost.

The fixed relay labels have been automatically generated by the Vista

system. They have the format

SIGOUT0_REL01,

where

SIGOUT0,

SIGOUT1

, etc. define the relay card number, and

REL01

REL02

, etc.

define the relay number on a particular card.

There are 16 relays per card. Some of the physically present relays may be

assigned to internal system functions and may therefore not be available for

the Signaling Configuration.

Source labels can be edited in the Patch pages; refer to

chapters 4.4.2

and

4.4.3

4.6.4.4.2

Signal Out Configuration

Signaling Outputs are generally relay contacts installed in the monitoring

frame. They may be used for various purposes, such as:

• Fader Start

• Microphone ON actions (loudspeaker muting, etc)

• Parallel Record/Ready mode of DAW tracks.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Studer Vista 5 M3, Руководство по эксплуатации, Страница: 255 / 564

Результаты поиска

Содержание Vista 5 M3

Отзывы: