Studer Vista 5 M3 страница 213 Скачать руководство пользователя

Страница: 213 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-69

Document generated: 28.08.13

SW V4.9

4.4.5.2.14

Hard Mute

‘Hard mute’ is an additional mute status. It can be used in the same way as a

mute group, but doesn’t need a mute group setup and has, in particular, top

priority over any other programmed mutes. This means that a hard mute is

fully independent of what is recalled via a snapshot, a VCA/mute event or a

mute group. It can be applied to every desired channel at any time, making

sure that no audio is passing through this/these channel(s). Its main purpose is

solving problems with a channel, if, e.g., a wireless microphone is defective.

In order to set up a hard mute, first the corresponding option needs to be

activated. This is done in the

User - Vista Settings

window. Select the

Misc

tab and tick the

Live mode activates Hard Mute

entry.

A click on the

LIVE

button (or pressing the small

LIVE

key in the desk’s

CONTROL ROOM

monitor section) followed by a channel

MUTE

button acti-

vates a hard mute of this channel, regardless whether this channel is currently

muted or not. If a channel is hard-muted, a

indicator appears in

the Vistonics label area, and the

MUTE

button is illuminated.

If a hard mute is applied to a channel that already has a ‘soft mute’ caused

either by the system (via a snapshot or a VCA/mute event) or manually with

the

MUTE

button, this is indicated by illuminating the

MUTE

button together

with the small

MUTE

LED, as shown below.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды