Studer Vista 5 M3 Скачать руководство пользователя страница 212

Страница: 212 / 564

Vista 5 M3 Digital Mixing System

4-68 GC Operation

Document generated: 28.08.13

SW V4.9

4.4.5.2.12

Isolate Labels and VCA Assignment

In order to allow label changes being copied into several snapshots (by recall-

ing and updating snapshots) they need to be able being isolated on an input

port-by-input port basis. This is done with the isolate button next to the

user label button in the general patch page; if isolation is active, the button

is highlighted in yellow.

Isolated User Label

The VCA assigns need to be able to being isolated as well. The VCA assign

isolation can also be done on the input channel side, individually channel-

per-channel. This is done in the channel patch page.

Isolated VCA Assignment

Isolated VCA User Label

4.4.5.2.13

Mute Groups

In theatre mode, the mute groups are fully independent from snapshots and

VCA/mute events. Mute group mutes will neither be saved in the snapshots

in this case, nor will they be overwritten by a snapshot recall.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Studer Vista 5 M3, Руководство по эксплуатации, Страница: 212 / 564

Результаты поиска

Содержание Vista 5 M3

Отзывы: