Studer Vista 5 M3 страница 185 Скачать руководство пользователя

Страница: 185 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-41

Document generated: 28.08.13

SW V4.9

4.4.4

Snapshot Page

The snapshot page of the graphical controller can be called up in three different

ways:

• From the Page menu, by clicking on the appropriate menu item

• Using the page icons, by clicking on the appropriate icon in the toolbar

• Using the

SNAPSHOT

function key on the console – which is probably the

fastest way.

The snapshot page deals with snapshot and preset management. Snapshots

and presets are extremely helpful when working with a digital console as they

contain the static values for all console parameters. The difference between

snapshots and presets is simple: While snapshots can be edited freely, presets

are accessible for editing in system administration mode only (refer to

chapter

4.7

Snapshots are saved within titles, and presets are provided with configura-

tions. Because of this, snapshots are readily available only while using the

title in which they were created. On the other hand, all presets that were

created for a particular configuration are available in any title that uses that

configuration. This allows presets to be used as templates (based upon that

configuration), while snapshots are specific to individual projects or sessions.

An other difference between snapshots and presets is that any filtering mecha-

nism is active for snapshots only, but not for presets. This means that after

having recalled a

preset

, the user can always be sure to have

all

audio settings

of this preset applied.

Using the Import facility from the File menu, it is possible to use snapshots

and presets from other titles and configurations, refer to

chapter 4.6.1.4

Because it is possible to save an

unlimited

number of snapshots, Vista ope-

rators will probably find themselves using them more and more every day.

A snapshot or preset will save:

• All audio settings: Fader levels, auxiliary settings, dynamics, delays, input

selectors, etc.

• Order of channel processing blocks;

• Direct output and meter source points;

• Bus assignments;

• All labels;

• All patch cross-point connections;

• Channel and other links;

• N–1/mix-minus assignments.



Tip

Snapshots and presets always save

every

control and switch setting for the

entire

console. The choice of recalling every setting to every control is up

to the operator. A sophisticated filtering system is available in order to keep

certain settings even when recalling a snapshot.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды