Studer Innotec MBC 12-25/3, Руководство пользователя, Страница: 18 / 46

INSTALLATION SITE
Install the battery charger in a dry and ventilated place and as near to the batteries as possi-
ble. The battery charger, although having high efficiency, develops a certain amount of heat
during functioning, therefore, it is imperative that the installation area has sufficient ventila-
tion, enough to allow use of the equipment at maximum power.
The battery charger can be installed in a horizontal or vertical position with cables coming
out in the downward position. The vertical position is recommended because the natural
convection of heat helps to cool the equipment. The perimeter of the battery charger (except
the base) must be kept at a distance from walls or objects by a minimum of 5 cm.
CHARACTERISTICS AND INSTALLATION
GB
The cables connected to the output terminals have a maximum length of 4 metres.
WARNING:
the battery charger must be used only with a re-chargeable lead/liquid
electrolytic batteries or lead/gel (sealed or non-sealed).
1 6
FIG.1
PART. A
PART. B
EQUIPMENT NECESSARY FOR INSTALLATION
On the basis of the type of model, use the batteries and cables on the output terminals as
specified in the following table:
MODEL
Battery voltage
Battery capacity
Minimum output cable size
MBC 12-30/3 MBC 12-40/3 MBC 12-60/3 MBC 24-30/3
12 V 24 V
140 ÷ 300 Ah 180 ÷ 400 Ah 270 ÷ 600 Ah 140 ÷ 300 Ah
10 mm 2 16 mm 2 25 mm 2 10 mm 2