STUCCHI MULTISYSTEM Series, Инструкция по эксплуатации

Страница: 6 / 11

MULTISYSTEM adapters are available in two versions:
- Magnetic version adapters are equipped with permanent magnets which provide a connection to
the metal plate inside the track (Pic. 1).
- Mechanical version adapters with automatic lock (Pic 1b)
All MULTISYSTEM adapter series come in two versions; non-polarised (without mechanical key, codes
9519… and 9529… Pic. 2) and polarised (with mechanical key, codes 9519…-K… and 9529…-K… Pic.3).
When using polarised adapters, take special care when inserting the adapter into the track. Once
inserted with the key properly oriented, the adapter must fit perfectly flush with the track without
protruding, and the key must interfere with the track (Pic. 4)
To wire the adapter, use stranded and tinned cables with cross sectional area between 0.5mm² and
1mm² rated appropriately for the luminaire’s power to be connected to the adapter.
Remove the adapter cover by loosening the two screws C1-C2 (Pic. 6). Wire the cables to the adapter
(Pic. 7) using the appropriate tool (made up of S-9009/T-HANS+S-9009/T-INS, to be ordered separately)
can comply with the pole markings inside the adapter (Vn, +, -); push the cable in until it is completely
inserted in the IDC contact. After wiring the 4 contacts, feed the cables through the central hole F1 (if
items 9519…are used) or through the two side hole F2 and F3 (if series 9529… items are used) (Pic. 8).
The luminaire can be fastened to the adapter using the following accessories: S-9519/5 + S-9519/M8 or
S-9519/M10.
After wiring the fitting and fastening it to the adapter, put the cover on the adapter and tighten the
two screws C1 and C2 (when using polarised versions, make sure that the cove is mounted in the
proper direction).
Once mounted, the adapter cover must be perfectly level with the plane L, without bulging, so that it
does not interfere with the correct operation of the adapter once it is installed on the track (Pic. 8).
MULTISYSTEM Adapter (2A-60V dc; 10N):
www.lightingaustralia.com.au/products/lighting-track/multisystem-48v-track/multisystem-48v-adapters-and-
accessories
6 11/7/2019
Adapter