Stryker PneumoSure, Инструкция по эксплуатации

Страница: 73 / 410

Configuration Menu (Overview)
67
EN
again to access the Utility menu.
10.3.1 Changing Display Settings
Factory setting
In the Utility menu, press the Display setting function field to access the selection
menu.
The display switches to the Display setting selection menu.
For example, press the Dimmer function field.
The display switches to the Dimmer selection menu.
Press the respective function field to set the dimming level (-75%/-50%/-25%).
You now have the opportunity to
1. save the selected value by pressing the (SAVE) function field. The display de-
picts
(SAVED)
for 2 seconds. After saving you return automatically to the pre-
vious level,
2. press the

function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
The display switches to the Display setting selection menu.
For example, press the Dimmer sensor function field.
The display switches to the Dimmer sensor selection menu.
For example, press the OFF function field.
You now have the opportunity to
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level,
2. press the

function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
10.3.2 Setting the Language
While insufflation is stopped, press the Actual function field for 2 seconds to ac-
cess the Configuration menu. In the Configuration menu I, press the

function
field to access the Configuration menu II and there press the

function field
again to access the Utility menu.
Factory setting = english
In the Utility menu, press the Language function field to access the language se-
lection screen.
Factory setting
Dimmer -75%
Dimmer sensor Activated
(1)
(3)
(2)
(1)
(3)
(2)