manualshive.com logo in svg

Stryker L10, Инструкции для пользователей из Соединенных Штатов

Поделиться
Скачать
Stryker L10 Скачать руководство пользователя страница 18

14

Connecting an IRIS Ureteral Kit

To activate IRIS mode, an IRIS Ureteral Kit (0220-180-518) must be connected 

to the light source. White Light mode and ENV mode do not require 

connection to an IRIS Ureteral Kit.

The IRIS connectors on the light source emit a Class 1 laser 

when IRIS mode is activated. To assure proper and safe laser 

application in IRIS mode, connect only the Stryker IRIS Ureteral 

Kit to the IRIS connectors. Do not attempt to use any other fiber 

optic light guides or emitting fibers.
Do not attempt to operate the light source with an IRIS Ureteral 

Kit that is cut or damaged. If the IRIS Ureteral Kit breaks during 

operation, disable IRIS mode, then replace the Kit.
Before connecting or using an IRIS Ureteral Kit, read and 

be familiar with all warnings in this user manual and the 

IRIS Ureteral Kit user manual (P26059). Use of controls or 

performance of procedures other than those specified can 

result in hazardous laser radiation exposure.

To connect an IRIS Ureteral Kit:
1.  Make sure the light source is powered off, or place it in Standby mode 

and disable IRIS mode.

2.  Insert the light source ends of both fibers into the IRIS connectors on the 

front panel of the light source.

Содержание L10





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды