A
B
C
F
Fiig
gu
urre
e 6
6 –– C
Ca
asstte
err a
asssse
em
mb
bllyy rre
ep
plla
acce
em
me
en
ntt
8. Reverse steps to reinstall.
9. Verify proper operation before you return the product to service.
A
Arrm
m a
asssse
em
mb
bllyy rre
ep
plla
acce
em
me
en
ntt,, ffiifftth
h w
wh
he
ee
ell,, ffiixxe
ed
d b
ba
asse
e
T
To
oo
ollss rre
eq
qu
uiirre
ed
d::
•
# 2 Phillips screwdriver
•
(2) 1/2” combination wrench
•
1/2” socket
•
3/16” Allen wrench
•
(2) Bungee cords (or equivalent)
P
Prro
occe
ed
du
urre
e::
1. Raise the litter and the rails to the highest position.
2. Apply the brakes.
3. Lift the base hood.
4. Separate the V
Ve
ellccrro
o® fasteners that secure the base hood to the base.
5. Using bungee cords, support the base hood.
6. Using a 1/2” combination wrench and 1/2” socket, remove the four locknuts (B) and four bolts (A) that secure the fifth
wheel assembly to the support plates (C, M) (Figure 7). Lower the assembly to the ground and remove the assembly
from underneath the base frame. Save the locknuts and bolts.
7. Using two 1/2” combination wrenches, remove the locknut and bolt (D) that secure the caster to the wheel arms (E)
(Figure 7). Remove and save the caster. Save the locknut and bolt.
8. Move the left support plate toward the brake/steer pedal (F) to disengage the swing arm and torsion lever assembly
from the support plates (Figure 7).
1900-009-002 Rev AA.6
15
EN
