Stryker AIR+ 2863, Руководство по обслуживанию

Страница: 8 / 46

F Fiilltte err rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• T20 Torx driver
P Prro occe ed du urre e::
1. Unplug the power cord from the wall outlet.
2. Unplug the support surface tubing from the pump.
3. Place the pump face down on a work surface.
4. Using a T20 Torx driver, remove the screw (A), washer (B), and flex grip (C) that secure the filter access door (D) to the
cover (Figure 2). Save the screw, washer, and flex grip.
C
D
E
A
B
F Fiig gu urre e 2 2 –– F Fiilltte err
5. Remove and save the filter access door (D).
6. Remove and discard the filter (E).
7. Install the new filter (E).
8. Reverse steps 1 - 5 to reinstall.
9. Insert the power cord under the power cord retention flex grip (F) (Figure 3).
EN 6 2863-009-002 Rev AA.1