Stryker 738, Руководство по эксплуатации

Страница: 9 / 21

www.stryker.com 0738-009-001 REV B 9
raISIng and lOWerIng lITTer HeIgHT - SIde COnTrOl
CaUTIOn
To avoid damage, remove any equipment that may be in the way before raising or lowering the litter height.
To raise the litter height, pump pedal (A) repeatedly until the desired height is achieved (see illustration on Operating
Base Controls - Side Control section).
To lower both ends of the litter together, depress the center of pedal (B). To lower only the head end of the litter, depress
the side of pedal (B) closest to the head end. To lower only the foot end of the litter, depress the side of pedal (B) closest
to the foot end (see illustration on Operating Base Controls - Side Control section).
raISIng and lOWerIng lITTer HeIgHT - 3-SIded COnTrOlS
To raise the litter height, pump pedal (A) repeatedly until the desired height is achieved (see illustration on Operating
Base Controls - 3-Sided Controls section).
To lower both ends of the litter simultaneously, depress pedal (B) and (D) together using the same foot or depress in the
center of pedal (C). To lower only the head end of the litter, depress pedal (B) or the side of pedal (C) closest to the
head end of the stretcher. To lower only the foot end of the stretcher, depress pedal (D) or the side of pedal (C) closest
to the foot end of the stretcher.
TrendelenBUrg / reverSe TrendelenBUrg - SIde COnTrOl
note
Litter height must be raised first in order to achieve a Trendelenburg or reverse Trendelenburg position.
CaUTIOn
To avoid damage, remove any equipment that may be in the way before lowering the stretcher.
For Trendelenburg positioning (head down), depress the side of pedal (B) closest to the head end of the stretcher (see
illustration on Operating Base Controls - Side Control section).
For reverse Trendelenburg positioning (foot down), depress the side of pedal (B) closest to the foot end.
note
The higher the litter is before pedal (B) is activated, the greater the Trendelenburg or reverse Trendelenburg angle will
be. (Maximum Trendelenburg angle is +18°. Maximum reverse Trendelenburg angle is -18°).
TrendelenBUrg / reverSe TrendelenBUrg - 3-SIded COnTrOlS
CaUTIOn
To avoid damage, remove any equipment that may be in the way before lowering the stretcher.
For Trendelenburg positioning (head down), depress pedal (B) or the side of pedal (C) closest to the head end of the
stretcher (see illustration on Operating Base Controls - Side Control section).
For reverse Trendelenburg positioning (foot down), depress pedal (D) or the side of pedal (C) closest to the foot end
of the stretcher.
Return To Table of Contents
Operation guide