Stryker 6516, Руководство по эксплуатации

Страница: 11 / 70

IIn nttrro od du uccttiio on n
This manual assists you with the operation or maintenance of your Stryker product. Read this manual before operating or
maintaining this product. Set methods and procedures to educate and train your staff on the safe operation or maintenance
of this product.
C CA AU UT TIIO ON N
• Improper usage of the product can cause injury to the patient or operator. Operate the product only as described in this
manual.
• Do not modify the product or any components of the product. Modifying the product can cause unpredictable operation
resulting in injury to patient or operator. Modifying the product also voids its warranty.
N No otte e
• This manual is a permanent part of the product and should remain with the product even if the product is sold.
• Stryker continually seeks advancements in product design and quality. This manual contains the most current product
information available at the time of printing. There may be minor discrepancies between your product and this manual. If
you have any questions, contact Stryker Customer Service or Technical Support at 1-800-327-0770.
P Prro od du ucctt d de essccrriip pttiio on n
The Stryker Model 6516 P Po ow we err--P PR RO O™ IT cot is a powered incubator transport ambulance cot. The cot consists of a
platform, mounted on a wheeled X-frame, that is designed to support and transport a maximum weight of 700 lb (318 kg) in
pre-hospital and hospital environments.
The device is collapsible for use in emergency vehicles and has an adjustable load height feature to allow the device to be
set to different ambulance deck heights for proper body mechanics during loading and unloading. The NiCd battery-
powered hydraulic lift system allows operators to raise and lower the cot using the powered controls, while duplicate foot
end controls on the upper and lower lift bars accommodate different operator positions or sizes. The cot is equipped with a
manual back-up release handle to allow the operation of cot functions in the event of power loss. The device is equipped
with a retractable head section for 360-degree mobility in any height position, four platform options for incubator system
compatibility, and various optional accessories that assist with transport of the patient.
The S SM MR RT T™ power system consists of a S SM MR RT T charger and a S SM MR RT T Pak. The S SM MR RT T Pak powers the hydraulic lift
system of the Stryker powered ambulance cots.
IIn nd diicca attiio on nss ffo orr u usse e
The Stryker P Po ow we err--P PR RO O IT cot is a powered incubator transport wheeled stretcher, which is intended to support a rigidly
affixed incubator system and transport the entire body of a traumatized, ambulatory or non-ambulatory human patient while
incubated.
The battery-powered hydraulic lift system, is intended to help reduce the effort required by the operator to raise and lower
the cot. The device is designed to provide a level patient surface at transport and working heights, and facilitate the
transportation of associated medical equipment (i.e. oxygen bottles, monitors, and/or pumps) in emergency/transport
vehicles. This ambulance cot is intended to be used in pre-hospital and hospital environments, in emergency and non-
emergency applications. It is rated to a maximum capacity of 700 lb (318 kg) (sum of the patient, incubator and accessory
weight) and the intended operators of the device are trained professionals including nurses, doctors, emergency medical
service and medical care center personnel, as well as medical first responders. Ambulance cots are intended for
transportation purposes.
P Po ow we err--P PR RO O IT is not intended for extended stay or use as a hospital bed or in devices that modify air pressure, such as
hyperbaric chambers.
6516-209-001 Rev D.0 7 EN