Stryker 650700000000, Руководство по эксплуатации и техническому обслуживанию

Страница: 9 / 76

W Wa arrn niin ng g//C Ca au uttiio on n//N No otte e D De effiin niittiio on n
The words W WA AR RN NIIN NG G, C CA AU UT TIIO ON N, and N NO OT TE E carry special meanings and should be carefully reviewed.
W WA AR RN NIIN NG G
Alerts the reader about a situation which, if not avoided, could result in death or serious injury. It may also describe
potential serious adverse reactions and safety hazards.
C CA AU UT TIIO ON N
Alerts the reader of a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the
user or patient or damage to the product or other property. This includes special care necessary for the safe and effective
use of the device and the care necessary to avoid damage to a device that may occur as a result of use or misuse.
N No otte e -- Provides special information to make maintenance easier or important instructions clearer.
S Su um mm ma arryy o off ssa affe ettyy p prre ecca au uttiio on nss
Always read and strictly follow the warnings and cautions listed on this page. Service only by qualified personnel.
W WA AR RN NIIN NG G
• Always install the in-fastener shut-off system (if not using a crash-rated cot fastener) in any emergency vehicle that will
be used with this cot.
• Always install the cot fastener by qualified personnel only. Improper installation could result in injury to the patient or
operator.
• Always make sure that all cots meet the installation specifications for the Stryker cot fastener system.
• Always adjust the rail clamp assembly to match the cot retaining post position for the cot manufacturer and model
number.
• Always position the in-fastener shut-off before you place the cot into service.
• Do not attempt to operate the cot when loaded into a cot fastener.
• Always use the in-fastener shut-off to disable the electronic functionality only.
• Always adjust the mounting location to maintain the proper position of the vehicle safety hook face when you replace an
existing vehicle safety hook with a new style.
• Always have a certified mechanic, familiar with ambulance vehicle construction, install the vehicle safety hook to avoid
injury to the patient or operator.
• Always consult the vehicle manufacturer before vehicle safety hook installation. Make sure that the installation of the
vehicle safety hook does not damage or interfere with the brake lines, oxygen lines, fuel lines, fuel tank, or electrical
wiring of the vehicle.
• Do not modify the cot or the vehicle safety hook. If the cot safety bar does not connect with the vehicle safety hook in any
of these positions (left, center, or right), modify the vehicle.
• Always make sure that that the cot safety bar connects with the vehicle safety hook every time before vehicle safety
hook installation.
• Always make sure that the cot safety bar connects with the vehicle safety hook before you remove the cot from the
vehicle patient compartment to avoid the risk of injury.
• Always use screws that are long enough to go through the vehicle patient compartment floor, washer, and nut, with at
least two full threads in the nut. The socket head cap screw length depends on the thickness of the vehicle floor.
• Always operate the cot only when all persons are clear of the mechanisms. Entanglement in powered cot mechanisms
can cause serious injury.
• Always inspect the battery for damage before every use.
• Do not allow untrained helpers to assist in the operation of the product.
• Always follow proper hand placement on hand grips. Keep all hands clear of the red safety bar pivots when you load,
unload, or change the cot height position.
• Do not ride on the base of the cot.
6507-009-001 Rev AB.3 3 EN