Stryker 6370, Руководство по эксплуатации

Страница: 21 / 99

English
EN
www.stryker.com 6370-109-005 REV C 1-15
Installation
Installing the floor plate (Continued)
4. Using two 3/8 in. diameter socket head cap screws (B), preferably grade 8, anchor each floor plate (C) into the
recessed openings with the counter-bored holes facing up (
Figure 1-10 on page 1-15 ).
Note: Steel backing plates (or equivalent) (D) (not supplied) are required for added support ( Figure 1-10 on page 1-
15 ).
CAUTION
Do not use screws smaller than the 3/8 in. diameter specified to anchor the floor plates.
A
B
C
Figure 1-9: Cut recessed openings over locating
holes
B C
D
Figure 1-10: Anchor floor plate into recessed
openings
5. Using the dimensions shown in Figure 1-8 on page 1-14 , locate and drill the four points where the rail support
bracket floor plate will attach. Cut one 2 1/2 in. x 5 in. x 9/16 in. deep opening (E) into the floor centered over the
locating points (
Figure 1-11 on page 1-16 ).