Stryker 2941-000-004, Руководство по эксплуатации, Страница: 12 / 452

P Prro od du ucctt iillllu ussttrra attiio on n -- p pu um mp p
A
B
C
E
F
D
G
C
H
I
J
A
Graphical user interface
F Power inlet
B Status indicator G Anti-vibration foot
C
Bumper
H HEPA filter
D
Transport handle
I
Hose port
E Hook J
AST port connector
F Fe ea attu urre ess
Shear management The product moves with the patient to assist in the
reduction of shear forces at the interface between the
surface and the patient.
Low Air Loss (LAL) The product provides air flow to help manage microclimate
of the skin.
Alternating low pressure (ALP) The support surface is constructed with rows of air cells
connected to two different air lines (C). Odd row air cells
(A) are connected to the A air line and even row cells (B)
are connected to the B air line (Figure 1).
Active sensor technology (AST) When AST is on, sensors in the sacral region (D) of the
support surface help control patient immersion (Figure 1).
Side bolster The left and right side bolsters (E) provide exterior support
to the patient. This helps to secure the patient within the
support surface (Figure 1).
EN 8 2941-009-005 Rev A.0