Stryker 2920, Руководство по эксплуатации

Страница: 28 / 42

24 2920-109-001 REV G www.stryker.com
Operation
Transporting a patient
Note: Do not use Turn Assist while transporting a patient.
To transporting a patient:
1. Unplug the support surface power cord and the bed power cord from the power source.
2. Stow the power cords to avoid the risk of entanglement during transport.
3. Raise and lock the siderails.
4. Transport the patient following all applicable safety rules and institution protocols to for patient and operator safety.
5. Plug the support surface power cord and the bed power cord into properly grounded, hospital grade power outlets
when you have reached the patient destination.
Note: The support surface will maintain air pressure for up to four hours while unplugged.
Managing incontinence and drainage
WARNING
Always monitor the patient condition at regular intervals for patient safety.
You can use disposable diapers or incontinence pads to manage incontinence. Always provide appropriate skin care
after each incontinence episode.