Stryker 1288010000, Руководство пользователя

Страница: 34 / 878

30
Problem Possible Solution
Optics are dirty • Rotate the scope. If dust particles in the picture rotate, the dust is
located on the scope itself. Follow the manufacturer’s instructions for
cleaning the eyepiece and negative lens.
• If particles in the picture do not move when you rotate the scope, the
particles are located on the coupler or camera. Remove the scope and
clean the window on the front of the coupler with a dry or alcohol-
tipped cotton swab.
• If dust particles lie between the coupler and camera, remove the coupler
and clean the coupler and camera windows.
• Ensure all components are completely dry before reassembling them, or
fogging may result.
Blurry picture • Ensure the coupler or C-Mount scope is in focus.
• Increase the enhancement.
• Ensure the specialty switch is not set to FLEXI-SCOPE unless you are
using a flexible scope.
Note:
If this troubleshooting guide does not resolve the problem, call Stryker Technical Support at
1-877-478-7953 (inside the U.S.) or refer to the “Warranty and Return Policy” section of this manual.