Struers AbraPol-30, Инструкция по эксплуатации, Страница: 23 / 78

Button Function
Start
• Starts the preparation process.
Stop
• Stops the preparation process.
Emergency stop
Note
Do not use the emergency stop for operational stop of the machine
during normal operation.
Before you release the emergency stop, investigate the reason for
activating the emergency stop and take any necessary corrective
action.
6.2 The display
Note
The screens shown in this manual may differ from the actual screens in the
software.
The display is the user-interface to the software.
When you switch on the machine, the display shows the configuration and the version of the
installed software.
The display is divided into some main areas. See this example.
A Title bar
The title bar shows the function you have selected.
B Information fields
These fields show information about the selected function.
In some fields you can select and change the value.
C Function key options
The functions shown depend on the screen that is
displayed.
Sound
Short beep A short beep, when you press a key, indicates that the selection is
confirmed.
You can enable or disable the beep: select Configuration .
Long beep A long beep, when you press a button, indicates that the key
cannot be activated at the moment.
You cannot disable this beep.
6 Operating the device
AbraPol-30 23