Struers AbraPol-30, Инструкция по эксплуатации, Страница: 21 / 78

OP pumps
1. Push the connector disc inwards and
remove the bottle plug from the OP flush
water connector.
2. Lead the short tube from the OP pump,
press the connector disc inwards and
insert the tube into the connector.
Calibrating the pumps
See Calibrating the pumps ►47 .
5.13.1 Placing bottles in the dosing unit
1. Exchange the bottle cap with the cap supplied with the DP/OP pump
unit.
2. Place the bottles in the bottle units and connect the tubes to the nipples
on top of the caps.
– DP-pump: Connect the long piece of tube (attached to the y-
connector) to the connector on the bottle cap.
– OP-pump: Connect the long piece of tube to the connector on the
bottle cap.
3. Enter the bottle details in the Bottle configuration menu to make them
available for preparation methods. See Bottle configuration ►27
Hint
If needed, you can extend the tubes and lead them through the holes in the bottle
unit to reach larger containers placed on the floor.
6 Operating the device
CAUTION
Do not use the machine with non-compatible accessories or consumables.
6.1 Control panel functions
CAUTION
Keep clear of rotating parts during operation.
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
6 Operating the device
AbraPol-30 21