Strongway 52862 Скачать руководство пользователя страница 4

Page 4 of 11 

 

Intended Use 

This Strongway Poly Strapping Tensioner and Cutter is used with 1/2 inch to 5/8 inch poly strapping. 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 
or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 
situations that could occur. Exercise common sense and caution when using this tensioner and 
cutter. Always be aware of the environment and ensure that the tensioner and cutter is used in a 
safe and responsible manner.  

 

Do not allow persons to operate or assemble the tensioner and cutter until they have read this 
manual and have developed a thorough understanding of how it works. 

 

Do not modify this tensioner and cutter in any way. Unauthorized modification may impair the 
function and/or safety and could affect the life of the tensioner and cutter. There are specific 
applications for which the product was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 
industrial equipment. There are certain applications for which this equipment was designed. It will 
be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment 
for a purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

 

This product may contain chemicals known to the State of California to cause cancer, birth defects 
or other reproductive harm. 

 

WARNING

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. 
Cluttered, wet, or dark work areas can result in injury. Using the tensioner and cutter in confined 
work areas may put you dangerously close to other cutting tools and rotating parts. 

 

Keep children and bystanders away from the work area while operating the tensioner and cutter. 
Do not allow children to handle the tensioner and cutter. 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the tensioner and 

Содержание 52862












Отзывы: