background image

STRONG HD STB User’s Manual

IMPORTANT SAFETY INFORMATION

1

All safety and operating Instructions should be read before the product is operated.

All warnings on the product and in the operating instructions should be adhered to.

Do not use this apparatus near water.

Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaning products.

Do not block any of the ventilation openings.

Do not install near any heat sources.

Do not defeat the safety purpose of the polarized or grounding-type plug.

Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

Only use attachments/accessories specified by the manufacturer.

Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Refer all servicing to qualified service personnel.

The SRT 5400 should be installed 10cm away from a wall to allow for the Power Switch and
Power Lead on the back panel

To reduce the risk of electric shock, do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified
service personnel.

This symbol indicates 

dangerous voltage

inside the product that

presents a risk of electric shock or personal injury.

This symbol indicates important instructions accompanying the
product.

Содержание SRT 5400





































Отзывы: