3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch your TV on. The language selection will appear
on the screen. Use
pq
to select the
Language
of your preference and select your country, confirm
with
OK
or arrow right button. Then select your Country/Region and confirm your selection with
OK
or arrow right button. The
Terms and Conditions, Privacy Notice, Cookie Notice
will appear, please read
it and confirm with
I agree
by pressing the
OK
button.
Now you can confirm your location. Here you can choose where you are using the TV. For normal use, you
can use the
Home
setting. After you selected the setting which fits for your usage, confirm with
OK
.
The installation will proceed to the
Network SetUp
screen, choose between “Wireless”, “Wired” or “I
do not have a network connection” and confirm with
OK
. Follow the steps that follow to successfully
complete your chosen option. If you choose "I do not have a network connection" you will be
forwarded to the one screen further.
On the following screen, you can select the
TV channel Installation
. Choose the one option you like
to use and follow the next instructions.
If you have chosen
Continue
option, you will be able to install channels. Select which installation you
want to use: (Antenna/DVB-T/T2, Cable/DVB-C or Satellite/DVB-S/S2).
If you have chosen the option Antenna/DVB-T/T2 you will have the following choices as an option
Digital
to receive digital terrestrial broadcasts
Analogue
for analogue terrestrial reception or both to
perform the installation of both choices simultaneously. Other tuners can be set-up if you choose for
“I don't want to scan”.
If you have chosen, this last option you will now have the possibility to scan Cable tuner.
Select
Digital
or
Analogue
option to scan cable broadcasts or choose for “I don't want to scan”. After
you have chosen digital as an example, you now have the option to choose your own cable-provider,
if available, or you can perform a manual scanning process. Correct frequencies are usually available
through your cable-provider. Please contact your provider for this.
If you have chosen“I don't want to scan”, you will now have the possibility to scan Satellite tuner.
If you have selected Germany, Austria, Czech Republic, Slovakia, Belgium or the Netherlands as your
preferred country, later during the DVB-S/S2 scan process, you can perform Fast Scan processes
where channels from the provider you have chosen are stored first in the channel list.
Follow the steps that appear on your TV screen to complete the installation of your TV and enjoy.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and
offers information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on the remote control. Press
EPG
to bring up the EPG interface. Use
pq
and then
t
u
to select
channel you like to see EPG overview. Press
BACK
to stop and return to viewing modes.
Press the
BUTTONS
for entering the required settings.
YELLOW
Schedule Reminder list
BLUE
Create reminder list
5.0 NETWORK CONNECTION
Your TV can be connected to your home network in two ways:
Wired, using the RJ-45 (LAN) connector on the back panel.
8
Содержание SRT 43UB6203
Страница 2: ......