Press
OK
to continue.
Crypted
Select
FTA Channels
to search Free-To-Air channels only or
All Channels
to
search FTA and encrypted channels
Press
pq
t
u
to highlight the country that you want to install, then press
OK
to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on the
remote control. Press
EPG
to bring up the EPG interface. Use
pq
to select a programme. Press
INDEX
and press
u
to switch to channel mode to overview from one channel EPG. Use
q
and then
t
u
to
select channel you like to see EPG overview. Use
pq
to select a programme. Press
EXIT
to stop and
return to viewing modes.
Then press the
COLOUR BUTTONS
for entering the required settings.
GREEN
Access extra info of programme
YELLOW
Open the reminder setting over view
BLUE
Set reminder of selected programme.
5.0 MENU SETTINGS
Below items depend if they are available of select input source. Use
INPUT
to select other source.
5.1 Menu control (DTV mode)
Press
MENU
to enter the main menu. Press
t
u
to select an item. Press
pq
and
OK
to select the
submenus. Press
MENU
to exit the item.
5.2 Picture menu
Picture Mode
Select the automatic picture control mode. Available choices are
Dynamic,
Standard, Mild
and
User
.
Colour Temperature
Select the overall colour tone of the picture. Available choices are
Cool,
Medium, Warm
and
User
.
Aspect Ratio
Select the aspect ratio (display proportions) according to your video signal
type or preference. Available choices are
Auto, 4:3,16:9, Zoom1
and
Zoom2
.
NOTE
:
Some options may not be available under some sources.
Noise Reduction
Eliminates noise in the picture. Available choices are
Off, Low, Middle
and
High
.
In the
User
mode, settings can be changed for
Brightness, Contrast, Colour
and
Sharpness
.
5.2.1 Contrast/Brightness/Colour Tint/Sharpness
If
Picture Mode
is set to
Personal
you are able to change the following settings
Press
pq
to select an option, then press
t
u
to adjust.
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
9
English
