3.1 DVB-S installation
Satellite Setting
Press
p
q
to highlight the satellite your dish is aimed at. The signal quality bar on the bottom of the
screen allows you to fine tune the alignment of your antenna for optimum reception. Adjust your
antenna for maximum possible signal quality. When the signal cannot be improved anymore, fix the dish
on this position and press the
BLUE
Scan
button to continue.
Channel Search
Press
p
q
t
u
to highlight the options of choice and press
ENTER
to start the channel search.
Scan Mode
Choose between
Fast Scan
(recommended),
Blind Scan
and
Network
Crypted
Select
FTA Channels
to search Free-To-Air channels only or
All Channels
to search FTA
and Encrypted channels
Service Type
Select
DTV
to search DTV channels only,
RADIO
to search radio channels only or
All
for a
complete search.
It is recommended to use the default settings.
3.2 DVB-T installation
Terrestrial Setting
First select the Tune Type by pressing
t
u
to select
DVB-T, ATV
or
DVB-T+ATV
(DVB-T to search digital
broadcasts and ATV to search analogue broadcasts). Press
q
to continue. Press
p
q
t
u
to highlight
the country that you want to install, then press
ENTER
to start searching.
NOTE:
If you have an active antenna, turn it on by following the instructions in
paragraph
5.4.5
and then repeat the scan.
3.3 DVB-C installation
Cable Setting
First select the Tune Type by pressing
t
u
to select
DVB-C, ATV
or
DVB-C+ATV
(DVB-C to search digital
broadcasts and ATV to search analogue broadcasts). Press
q
to continue. Press
p
q
t
u
to highlight
the country that you want to install, then press
ENTER
to start searching.
4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on the
remote control.
Press
EPG
to bring up the EPG interface. The second bar from the top will display the current date and
time. On the list below, the channel you are currently watching will be highlighted. Before you can
view any EPG information, you have to 'activate' every channel for which you want to view programme
information. To do this, use
pq
to select a channel, then press
ENTER
to confirm.
To check programmes which will be broadcasted on a future date, scroll up to the date field with
p
.
Use
u
to select the date you want to check. Press
u
/
2
to scroll up to the top bar in the display, then
8
English
