Stromag EDB Series, Инструкция по монтажу

Страница: 59 / 104

1 Introduction
1.1 About this documentation
Stromag GmbH, hereafter referred to as Stromag, recommends referring to the dimensional drawing for techni-
cal details such as dimensions, weights in kg, tolerances, tightening torques and operating material required for
assembly, such as safety devices and lubricants.
Should this information be necessary during assembly, a corresponding point in these mounting instructions will
refer to the dimensional drawing.
A dimensional drawing is supplied as a separate document and can also be requested from Stromag's Custom-
er Care, see section 11.2. For this, the information on ordering spare parts is required, see section 11.1.
For the purpose of simplification, the following designations are used in the mounting instructions.
• The mounting instructions will hereafter be referred to as documentation .
• The electromagnetic multi-disc clutches EKE/EKB and EDE/EDB will be referred to as Clutch in the follow-
ing.
This documentation makes it easier for the operator to familiarise himself with the clutch and to use it correctly.
The documentation contains important instructions on how to operate the clutch safely, properly and economi-
cally. Observing the documentation helps to avoid dangers, to reduce repair costs and down times and to in-
crease the reliability as well as the operating life of the clutch. Read the documentation carefully and thoroughly.
1.1.1 Target group
The documentation is limited to use by qualified as well as trained personnel.
The documentation must be read and applied by every person that is assigned with performing at least one of
the following tasks:
• transport,
• assembly,
• use,
• maintenance and inspections,
• troubleshooting,
• disassembly,
• disposal of operating and auxiliary materials.
1.1.2 Use/storage
This documentation must always be kept to hand at the operation location of the clutch. The documentation
must then be integrated into the overall documentation of the complete machine and into the safety concept.
When selling the clutch, the documentation must also be passed on.
1
Mounting instructions Electromagnetic multi-disc clutch EKE/EKB, EDE/EDB • No. 500-00000 C • 10/2017