Original assembly/operating instructions Gear limit switch Type series 51 • No. 151-00004 H • 01.2018
38
6.7.3
Mount the CxZ, MxZ housing from 2 intermediate pieces
Housing cover assembly, from 2 intermediate pieces
According to the switching point number, the housing cover (3) will be
extended with spacers (2).
1. Check the seal(s) (1) of the cover and the intermediate pieces for
cracks or damage.
NOTE
Replace damaged seals.
2. Fit the intermediate pieces and housing cover.
3. Fix the housing cover with 4 nuts (4), see section 6.2.3.
6.8
Correct disposal/recycling of operating and auxiliary materials.
Materials that can be recycled must be included in the waste disposal cycle.
Local regulations in the country of operation determine the disposal of components.
7
Operation
7.1
Special safety guidelines
See operating instructions of the machine.
7.2
Initial commissioning
The adjustment of the GCLS is only permitted when the machine is at a standstill.
7.3
Handling
Handling of the GCLS during machine operation is not necessary, see the operating instructions of the machine.
7.3.1
Operating conditions
See section 4.1.
7.4
Recommissioning
No specific measures are necessary for recommissioning.
7.5
Decommissioning
7.5.1
Temporary decommissioning
No specific measures are necessary for temporary decommissioning.
7.5.2
Final decommissioning
No specific measures are necessary for final decommissioning.
Dispose of materials according to local regulations.
Fig. 27
