Original assembly/operating instructions Gear limit switch Type series 51 • No. 151-00004 H • 01.2018
21
All switches with CE marking, other approvals are possible, see marking on the type plate or in the attached
document:
CSA
Canada
EAC
Eurasian Customs Union (Russia, Belarus, Kazakhstan,
Kyrgyzstan, Tajikistan)
cUL
USA
DGUV Certified for operation according to DGUV V 17
(previously BGV C1 / VBG70)
CCC
China
TAT
Approval on request
4.1.9
Unit
To fix the GCLS, do not use any screw locking agent, see the operating instructions of the complete machine.
NOTICE
Damage to the GCLS due to contact with liquid screw locking agents.
Plastic components may be softened and damaged by contact with liquid screw locking agents.
Prevent plastic components from coming into contact with liquid screw locking agents.
4.2
Dimensional Drawing
NOTE
Stromag GmbH strongly emphasises that the technical details, such as dimensions, weights,
tolerances, tightening torques and other technical specifications and units required for assembly,
such as securing devices and lubricants, must be obtained from the dimensional drawing.
Should this information be necessary during assembly, a reference will be made in the dimensional
drawing at the respective point in this documentation.
A dimensional drawing is supplied as a separate document and can be requested additionally from
our after-sales services. For this, the same product data is required as when ordering spare parts.
4.3
Marking on the product
The following data can be found on the housing of the GCLS:
Manufacturer's address, order number, designation, month/year of construction, marking, voltage Ui, current I
th
.
NOTE
Switches and housings have identical type plates. The data, for e.g. for a spare part order, must be
read from the respective assembly group.
