The main pieces of equipment you’ll
be using are the VR headset and its
attached controller.
Before you start training, make sure
the headset is charged. Plug the
white USB cable into the adapter
and plug it into a wall outlet. Then
plug the other end into the charging
port on your headset. If you see a
red or yellow light on the headset,
it’s charging. If the light shows
green, the headset is fully charged.
Don’t start training if the light is red.
A full charge takes about two hours.
Get ready to experience Immersive Learning. You’ll be putting on a VR headset and exploring
training activities in a virtual world.
This booklet will give you an overview of how to use the equipment and what to expect, plus
some troubleshooting tips.
01
Get ready
ST
E
P
Welcome to Immersive
Learning with Strivr
INDICATOR
LIGHT
CHARGING
PORT
