background image

 

Read this instruc

on before opera

on 

Digital Handset Opera

on 

1. Panel 

 

2. Ini

aliza

on procedure 

Step 

Opera

on 

Mo

on 

Press and hold 

&

simultaneously for more than 3 

seconds 

Legs begin to move down at half speed of normal opera

on 

Keep pressing 

&

 

Legs move down to the lowest posi

on and rebound 2-5 mm, 

then stop 

Release 

&

  together 

Ini

aliza

on is completed 

 

The ini

aliza

on procedure must be completed before the 

rst running a

er table is installed or parts replaced. 

3.Move up and down 

Step 

Opera

on 

Mo

on 

Press and hold 

 

Legs move up 

Release 

 

Legs stop 

Press and hold 

 

Legs move down   

Release 

 

Legs stop 

 

 

 

Mobel Motion MK 2

User Guide 

Содержание Mobel Motion MK 2

Страница 1: ...l opera on 2 Keep pressing Legs move down to the lowest posi on and rebound 2 5 mm then stop 3 Release together Ini aliza on is completed The ini aliza on procedure must be completed before the first running a er table is installed or parts replaced 3 Move up and down Step Opera on Mo on 1 Press and hold Legs move up 2 Release Legs stop 3 Press and hold Legs move down 4 Release Legs stop Mobel Moti...

Страница 2: ...le at any height recommended at the bottom position Measure the table actual height and write down the number in inches or in centimeters 2 Press and hold button S then press and hold keep for about 3 seconds The first number starts flashing on the screen 3 Release the buttons then click or to change the first number The first number is being increased or decreased to the first number you measured...

Страница 3: ...Step Operation Motion 1 Press and hold or then release Run the legs to the position you want the table surface to be 2 Press and hold button S then press and hold 3 keep for about 3 seconds Letter L is indicated on the screen That means the position is locked at the lowest position that the table can be moved to 3 Release the buttons Completed 1 Legs aren t able to run higher than the locked posit...

Страница 4: ... useful otherwise exchanging the handset E06 Communication outage Check whether the connection between the handset and the control box is reliable E07 Wrong setup of the height The height of the handset is low and the height value is below 0 need to adjust the height to increase it 12 Adjust the anti collision sensitivity of GYRO sensor Step Operation Motion 1 Press the button S for more than 5 se...

Отзывы: