Emergency Jumpstarter
& Portable Power Bank
A
POWERFUL
but compact
400Amp-(peak)
Emergency
Jumpstarter for most 12V vehicles.
PLUS
a Power Bank that
also provides
HOURS OF PORTABLE POWER
for smart phones
or tablets and much more when out and about!
SWPB1
12V -
400Amp
Emergency Jumpstart & Power Bank contents:
Emergency Jumpstarter & Power Bank
12V Smart Jumpstart Cables
(protects jumpstarter &
vehicle battery).
240V mains plug.
12V in-car charging plug.
USB charge cable with
3 built-in assorted adaptors.
Laptop charging lead with 8 adaptors
Emergency Jumpstart Operating Instructions:
The unit can jump start vehicles with a minimum of 3 LED’s lit. However for
optimum performance fully charge the unit (5 LED’s lit). NEVER USE THIS PRODUCT
TO JUMPSTART WITH LESS THAN 3 LED’s LIT AS THIS CAN CAUSE PROBLEMS AND
DAMAGE THE PRODUCT.
1.
Connect the crocodile clips in the following order. Positive (+ Red) charging lead to the
positive (+ Red) terminal. Connect the negative (- Black) charging lead to the negative
(- Black) terminal. It is important that the crocodile clips are making good contact with
the battery terminals.
2.
Connect the crocodile clips into the Jumpstarter power outlet.
3.
Turn the key to start the vehicle engine in no longer than 4 second bursts. If the engine
does not start immediately turn off the engine, wait at least 15 seconds.
4.
When the vehicle starts, IMMEDIATELY unplug the power supply plug from the unit and
remove the crocodile clips from the battery.
Please READ & UNDERSTAND the instructions carefully before operating this device, and
retain for future reference.
IT IS RECOMMENDED TO CHARGE THE UNIT FOR AT LEAST 3 HOURS BEFORE ANY USE AND TO
KEEP IT FULLY CHARGED WHEREVER POSSIBLE.
PLEASE NOTE: The Emergency jumpstart will NOT jumpstart a vehicle if it has a Voltage rate is
above 12.3V (a good level of charge). If the vehicle does not start this may indicate another
problem. Please have the vehicle checked by a qualified mechanic.
SWPB1 Manual AW 2019.qxp_Layout 1 29/03/2019 09:25 Page 2