02 4961 4247
02 4961 5535
www.lumaled.com.au
INSTALLATION
INSTRUCTIONS
Brand
Light Type
Model/s No
StreetLight
LLRA2 - 40 & LLRA2 - 60
Product Dimensions
Vertical Installation
Horizontal Installation
1 - A
1 - B
2
3
Maximum area against wind - 0.15m²
For the 60mm pole first remove the supplied
adapter inside the pole attachment area.
Attach the light to the pole as per the diagram.
Ensure the wire is fed through the pole
into the light.
For the 48mm pole use the supplied adapter inside
the pole attachment area.
Attach the light to the pole as per the diagram.
Ensure the wire is fed through the pole
into the light.
Position the light securely over the pole
and tighten the screws with a 4mm
Allan key.
To connect the wires from the pole to the light
Loosen the screw as shown in the diagram
Open the light and connect the wires to their contacts.
Ensure that the screw is then tightened.
Screw should be locked tightly to ensure the light is
waterproof.
