Revised 09/24/2018
SWBJ21 Series Instruction
*IMPORTANT:
The Disable Pin (attached to the wrist strap) must be inserted into the bottom
of the unit in order for the stun to operate. The alarm and light will both function without the Safety Pin inserted.
CHARGING THE BATTERIES
1.
The rechargeable batteries are already installed. The unit cannot be opened, as this will void the warranty.
2.
Before use, the stun gun will need to be charged for 8 hours. Insert the slide-out plug on the bottom of the unit into a standard
outlet. The Charging Indicator Light (#8) will come on while charging.
IMPORTANT:
Do not charge for more than 8 hours at a
time.
Overcharging can damage the unit and void the warranty
. Under normal use the unit will need to be recharged for 8
hours every 60 days. If the LED Flashlight is used frequently or if the electrical charge produced by the stun gun becomes
noticeably weaker, the unit will need to be recharged.
USING THE FLASHLIGHT
1.
Slide the Safety/Function Switch located on the side of the unit
up
to the top position to turn on the LED Flashlight. **Be
careful**, if the Disable Pin (#9) is inserted into the bottom of the unit, the stun will work if the Stun Trigger (#6) is pressed.
2.
Slide the Safety/Function Switch back
down
to the middle position to turn off the light.
TESTING THE STUN GUN
(
WARNING:
Do not test fire the stun gun for more than 1 second as this will damage the unit and void the warranty.)
1.
Insert the disable pin (attached to the wrist strap) into the bottom of the unit.
2.
Slide the Safety/Function Switch (#5) located on the side of the unit
up
to the
top
position. The flashlight will come on and the
Stun Warning Light (#4) will illuminate.
3.
Press the Squeeze-N-Stun Trigger (#6) located on the side of the unit to test the stun gun. You will both see and hear an
electrical charge fire across the top of the unit between the Stun Contact Probes (#1). When test firing the unit, do not hold the
button down for more than 1 second.
4
Slide the Safety/Function Switch back
down
to the middle position to turn the safety back on.
USING THE ALARM
Slide the Safety/Function Switch located on the side of the unit down to the
bottom
position. The alarm will come on. Slide switch
back to the middle positon to turn the alarm off.
6
3
1
5
4
1
2
2
6.
Squeeze-N-Stun Trigger
7.
Built-In Charger
8.
Charging Indicator Light
9.
Disable Pin*
10.
Wrist Strap
1.
Stun Contact Probes
2.
Test Probes
3.
LED Flashlight
4.
Stun Warning Light
5.
Safety/Function Switch:
(Alarm • Off • Light / Stun)
Switch View
Alarm
OFF
Light/Stun
9
Back View
10
7
8
