46
17.5.4
S
YMBOL
M
EANINGS
The following symbols are located within the navigational bar:
Accessible for end-user and experts:
Start page: Plant status. Access to plant switch (or zone switch).
Temperature page. Access to heating.
Ventilation page. Access to ventilation.
Domestic hot water page. Access to hot water handling.
Info pages:
•
Messages (errors, events).
•
Plant information.
•
Energy data and consumption on a time axis.
Service/setting pages:
•
Setting options on device or plant.
•
Operate special operations (e.g. for maintenance work).
•
Login in expert view (see note below).
Available in addition for experts:
Diagnostic pages: Analyses and test plant.
Adjust/repair pages:
•
Adapt parameters in 'Complete parameter list.'
•
Access to commissioning wizards.
The following symbols can be displayed on the status bar
– Top horizontal bar:
Symbol 'Alarm' indicates a plant error.
Symbol 'Maintenance/Special operations' indicates the presence of a maintenance
message or special operation feedback.
Symbol 'Event' indicates an event message from the plant.
'Hand' symbol the 'Hand' symbol is displayed if the plant/zone switch setting is
changed by making an adjustment on the topic pages.
Adjustments made on the topic pages can be reset at the plant/zone switch.
12:00
The device clock is synchronized with the clock from the connected controller.
Symbol 'User' and the number to the right (access level 1 to 3) indicate which user
level is currently active.
•
1: Commissioning engineer
•
2: Heating engineer
•
3: OEM
Symbol 'Producer' indicates the main producer (e.g. oil/gas boiler, heat pump) that
is currently switched on.
The following symbol is displayed in any area:
The back arrow returns from the work area to the navigation bar.
Содержание S-ASX 30
Страница 2: ...2 ...
Страница 24: ...24 10 CORRECTIVE FACTORS 10 1 Heating Performances ...
