Streamit SAS310, Руководство пользователя

Страница: 16 / 34

SAS310 16
5.4.2
Username and password for the configuration interface
You can change the username and password of the configuration interface by entering the desired
username and password under 'Set Username/Password'.
The default setting can be found at Username and password of the configuration interface ..
The SAS310 must reboot to activate the new username and password.
5.4.3
URL of the configuration server
By default the SAS310 uses only the locally stored configuration information (settings), leaving the
'Device configuration URL' empty. If you enter a URL in this field, the SAS310 will retrieve configuration
information (settings) during startup from the indicated location.
URLs with HTTPS can be used (SSL-secured connections), but this requires officially signed
certificates. The use of 'self-signed' certificates is not supported.
It is possible to set up your own configuration server. However, this requires considerable technical know-
how. The format in which the configuration information must be served, is documented in the SAS310 -
Technical Manual.
5.4.4
Daily reboot
When using the SAS310 for a long time, it is recommended to reboot the SAS310 once every 24 hours.
You can do this automatically by entering a time in the field 'Daily reboot time'. The restart of the
SAS310 takes approximately 1 minute. Give the time in the format hh:mm and leave the field empty if
you do not want the SAS310 to reboot each day at the same time.
5.4.5
Automatic shutdown
The SAS310 can be configured to automatically switch off after a user-set period of time. This can be
used if, for example, the SAS310 is sometimes accidentally switched on or to avoid considerable
streaming costs. The time is set in minutes and countdown starts after the SAS310 has fully started.
Leave the field empty if you do not want the SAS310 to shutdown automatically after a given period of
time.
5.4.6
URL of the device register
By default the SAS310 sends information about itself to the Streamit device register , leaving the 'Device
register URL' empty. If you enter a URL in this field, the SAS310 will send the information to the
indicated location.
URLs with HTTPS can be used (SSL-secured connections), but this requires officially signed
certificates. The use of 'self-signed' certificates is not supported.
It is possible to set up your own device register. However, this requires considerable technical know-how.
The format in which the SAS310 sends the information about itself, is documented in the SAS310 -
Technical Manual.