4. Basic knowledge
Using power adapters other than the one recommended for your SAS220 device, can
result in overheating and damage you device. This can cause fire, electrical shocks
and other hazards. Only use the supplied power adapter.
Applying your SAS220 device to situations with rapid changing temperatures can
result in condensation (small amount of water) on the inner and outer surface of your
device. To ensure a long lifetime of your SAS220 device, this should be prevented. In
case of such a scenario, wait until you device is ’dry’ before you use it again.
All our power adapters currently are wide-range 90-240VAC.
3.3.3
Connecting the ethernet cable
Use the provided Ethernet cable to connect your SAS220 device with your cable modem, ADSL modem
or router. If everything is OK (and the power supply has also been connected) the yellow LED of the
Ethernet connector will light-up yellow continuously while being connected. The green led will blink
randomly.
3.3.4
Connecting the audio input
Connect the line output of your audio source to the audio input of your SAS220 device, using XLR audio
cables with male connectors. No audio cables are included with your SAS220 device.
3.3.5
Connecting the headphones
To listen to the input signal of the SAS220 a headphone with 6,3 mm connector can be connected. The
audio is only available while the SAS220 is encoding/streaming.
3.3.6
Connecting the USB service cable
The USB connection is used for service purposes, which include programming your device, software up-
date and monitoring of the communication between the SAS220 device and the internet. The B-connector
of the USB cable is plugged in the device, while the A-connector connects to your Windows PC. Before
making this connection we recommend that the Streamit Terminal Program is first installed.
4
Basic knowledge
The SAS220 is an internet audio encoding and streaming device. It can encode the audio into Ogg Vorbis
or MP3 and stream it to an Icecast distribution server. The SAS220 can also be used as a server, so
that client devices can connect directly to the SAS220. In this case, the SAS220 device can serve up to
2 connected client devices.
Version 1.3
28/10/2015
9 of 21
