Streamcore.com
Page 18 on 26
2021 Streamcore SAS - All rights reserved
Figure 7 – Deployment to manage 2 WAN links
5.1.2
DUAL configuration
The figure hereafter shows how to connect 2 SG4412 to create a DUAL configuration.
Case of Dual
Note that only LAN1 and WAN1 interfaces are used in Dual mode. LAN2 and WAN2 ports are ignored by the
Streamcore software in this configuration. It is not necessary to connect them to the network. Refer to
StreamView User Guide for further details.
The StreamGroomers are connected with the interface EXT. Refer to the StreamView documentation for further details to
declare a site supported by a pair of StreamGroomer configured and connected in Dual mode.
Note: The StreamGroomers are connected with the EXT link. They should belong to the same subnet to keep the
communication as fast as possible between the 2 StreamGroomers.
