Design and function
Super-Vitesse CFS 3101, 3501 / Super-Vitesse CFS 3101 DO, 3501 DO 10.13
59
5.7
Dosing drums
Machines with the type designation "DO" are
equipped with 2 or 3 beaters (1), depending on
the version.
The p.t.o. shaft of the tractor powers the bottom
beater via the propeller shaft, main gearbox,
front drive shaft, front angular gear, claw clutch,
lateral drive shaft and rear angular gear. The
individual beaters are connected with each other
by means of roller chains. Each roller chain is
equipped with a chain tensioner.
Hydraulic disconnection of transport floor
The bottom beater:
is movably mounted on the left-hand side in
the direction of motion.
evades to the rear if the loaded material
applies a particular pressure to this beater.
The switching plate releases an electrical
pressure switch and disconnects the
hydraulic drive of the transport floor. The
control set simultaneously displays the
message "Forage wagon full".
These measures are intended to prevent the
loaded material from being too strongly pressed
against the beaters and the beaters from
becoming clogged during discharge.
During discharge, the hydraulic drive of the
transport floor automatically restarts as soon as
the loaded material is no longer applying any
pressure to the bottom beater.
Fig. 29
5.8
Access door and ladder
Access door (1), ladder (2) and handle (3) permit
access to the cargo space. The locking
mechanism (4) secures the closed access door
and the folded-up ladder in transport position.
Fig. 30
1