Safety instructions
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
70
3.4.2.3
Transport journeys
•
Observe the respective national road traffic regulations when travelling on public roads!
•
Before carrying out transport journeys, check
the supply lines for proper connection,
the lighting system for damage, proper functioning and cleanliness,
the brake and hydraulic system for visible defects,
whether the parking brake has been completely released,
the brake system for proper functioning.
•
Always ensure sufficient steerability and braking ability of the tractor!
Machines attached or hitched to a tractor and front or tail weights influence the driving
characteristics as well as the steerability and the braking ability of the tractor.
•
Use front weights if necessary!
The tractor's front axle load must never fall below 20 % of the tractor's empty weight, in order to
ensure sufficient steerability.
•
Always properly fix front or tail weights to the fixing points provided for this purpose!
•
Observe the maximum loading capacity of the attached / hitched machine and the admissible
axle and tongue loads of the tractor! Run the machine being only partly filled if necessary.
•
The tractor must ensure the required deceleration for the charged combination (tractor and
attached / hitched machine)!
•
Check the braking effect before starting the journey!
•
Observe the broad overhang and the flywheel mass of the machine when cornering with
attached or hitched machine!
•
Set all swivelling machine parts to transport position before carrying out transport journeys, in
order to avoid dangerous movements. Use the transport locks provided for this purpose!
•
Before carrying out transport journeys, check whether the required transport equipment, such
as lighting, warning and protective devices, has been properly mounted on the machine!
•
Adapt your travelling speed to the conditions prevailing at the time!
•
Shift down to a lower gear before travelling downhill!
•
Always switch the single-wheel brake system off (lock pedals) before carrying out transport
journeys!
•
Never take a tight curve at excessive travelling speed.
•
It is imperative to lock the passive steering axle:
at travelling speeds of more than 40 km/h,
before travelling over clamp silos,
on rough road tracks,
when traversing hills,
before carrying out reverse travels.
Содержание Giga-Vitesse CFS 3602
