Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 280 / 327

Service and maintenance of machine
Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18 280
8.15.7 Tightening torques of wheel nuts
ARD FAD BPW
black
BPW
galvanised
M18x1.5
Spherical collar nut
270 Nm 330 Nm
– –
M20x1.5
Flat collar nut with spring washer
350 Nm 360 Nm 380 Nm 420 Nm
M22x1.5
Spherical collar nut
–
630 Nm - -
M20x1.5
Flat collar nut with spring washer
450 Nm 460 Nm 460 Nm 505 Nm
8.15.8 Check clearance of wheel hub bearing
1. Lift the axle until the tyres are free.
2. Release the brake.
3. Place two levers between tyres and ground
and check the bearing clearance.
If there is a noticeable bearing clearance,
have it readjusted by an authorised
workshop.
Fig. 151
8.15.9 Check brake linings
1.

Open the inspection hole (3) by pulling out
the rubber plug (if available).
Have the brake linings replaced by an
authorised workshop in case of a
remaining lining thickness of:
5 mm (riveted linings)
3 mm (glued linings).
2.

Reinsert the rubber plug after the check.
Fig. 152