Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 137 / 327

Operation
137 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
6.1.3 Functions of the ISOBUS control
The following paragraphs show the symbols of the operating elements of the control set, their
functions and the displays on the screen.
6.1.3.1 Switch control set on/off
At the same time, this key serves as emergency stop. After the
control set has been switched off, all hydraulic functions are also
switched off.
1. Press the key once.
The control set is switched on or off.
With the control set switched on, the
Working menu appears on the
screen. When the control set is
switched off, the display on the
screen goes out
The screen shows:
6.1.3.2 Switch road travel mode on
The road travel mode can only be
switched on:
•
with lifted pick-up (attention, the
pick-up is not checked for
having been completely lifted),
•
with lowered tailgate,
•
with the transport floor
stationary,
•
with the beaters stationary.
If these requirements are not fulfilled,
a beep is emitted, a warning message
and the non-fulfilled requirement in the
Working menu appear:
(1)

Warning message
(2)

Pick-up down
(3)

Tailgate lifted
(4)

Transport floor powered
(5)

Beaters powered
The screen shows: