Strautmann Giga-Vitesse CFS 3602, Руководство по эксплуатации

Страница: 107 / 327

Commissioning
107 Giga-Vitesse CFS 3602 - 4402, Giga-Vitesse CFS 3602 DO - 4402 DO 03.18
5.9 Pick-up
5.9.1 Set operating height
Loaded material and ground condition determine the operating height of the pick-up.
Set the operating height of the pick-up at the same level by means
of the two guide wheels. The spring-loaded tines must not scratch
the ground. The distance between the spring-loaded tines and the
ground should be approx. 10-20 mm.
The operating height of the pick-up is set by means of the two-hole
perforated struts (2):
•
Front borehole = Lowest operating height of pick-up
•
Rear borehole = Highest operating height of pick-up
1. Lift the pick-up (1).
2. Secure tractor and machine against
accidental starting and rolling.
3. Remove the rear linch pin of the perforated
strut (2).
4. Use one hand to hold up the supporting
tube (3) of the guide wheel (4), while using
your other hand to hang the perforated
strut of the pick-up into the desired
borehole.
Fig. 55
Check the setting of the additional guide wheels in any case.