Stratus V 6624, Руководство по установке оборудования

Страница: 59 / 78

Removing a U779V Fabric Switch
Removing and Replacing a U779V Fabric Switch A-5
6. Standing at the rear of the cabinet, disconnect the cables at the front of the fabric
switch ( Figure A-4 ). The cables should already be labeled as shown in Table A-1 ;
if not, label them before you disconnect them.
N O T E S
1. Table A-1 shows the port configuration for a
U779V fabric switch used in a fully configured
ftServer V 6624 system. Your configuration may not
use all of the ports that are shown.
2. The top and bottom fabric switches both use the
configuration shown in Table A-1 . Note that the
cables for the top switch are blue, and the cables for
the bottom switch are yellow.
Table A-1. Cable Configuration for Fabric Switch on Fully Configured V 6624 System
Top
Row
Port 0 Port 1 Port 2 Port 3 Port 8 Port 9 Port 10 Port 18
R1 A1 B1 E1 F1 I1 J1 Secondary
port used for
optional tape
drive
Bottom
Row
Port 4 Port 5 Port 6 Port 7 Port 12 Port 13 Port 14 Port 22
R2 C1 D1 G1 H1 K1 L1 Primary port
used for
optional tape
drive